CANDU 6 channel engineering packet — independent teaching reconstruction

Native CAD: millimetres, channel axis Z, channel midpoint at origin. Browser
uses metres and translates Y by 5 m for illustrative plant placement.
Decompress .step.gz files before importing STEP in a CAD application.
The bundle coupon and complete channel are alternative inspection scales;
do not sum their inventories. Cutaways remove the positive-X/positive-Y
quadrant of enclosing tubes/spacers/end fittings and keep fuel geometry.

Published anchors: AECL CANDU 6 Technical Summary (May 2005), supplemented
by F. J. Doria / AECL slides (24-May-2001, Rev.0). Exact sources, hashes,
units, assumptions and conflicts are in reference.json. Source publications
and images are linked, not redistributed. No supplier CAD is included.

Shapes represent sheaths/end caps, authored pads/end webs, tube envelopes,
spacer envelopes and simplified end fittings/closures. Pellets, welds,
seals, bearings and spring coils are omitted. Nominal dimension arithmetic
is not an operating clearance, tolerance requirement or safety result.
No stress, creep, thermal-hydraulic or neutronics solver has run.

cad-receipt.json records exact generation inputs, runtime, per-solid
validity and STEP roundtrip counts, names, bounds and volumes. Attachment
parts may overlap; summed solid volumes are not material inventories.
SHA256SUMS binds every content file in this packet (except itself).
Reproduce with scripts/candu/project.mjs and modsim/tools/candu/README.md
in Morton-Labs-AI/morton-labs-website. Authored geometry is independent;
source documents retain their respective rights and notices.
