United States · Boiling water reactor

Limerick.

2 BWR units at Limerick, beside the boiling water reference plant concept. The 3D model shows how the family works; it is not Limerick's actual layout.

Back to the globe at Limerick
Close view of the illustrative boiling-water plant concept: one tall reactor vessel rising almost to the crane bridge of its open building frame, with steam and recirculation piping at its base and the turbine casing at the right edge.REFERENCE CONCEPT · NOT A SIMULATION

Reference still · interactive view loads when available

Reference concept · Reference · BWR/4

The boiling water reference plant.

The family’s reference concept, not Limerick. The model illustrates a boiling water reactor concept, with the generic layout every design in the plant library shares: the reactor island, a turbine hall, air-cooled condensers and a grid connection. It does not show Limerick's buildings, number of units, cooling or equipment.

The concept has external recirculation loops, as on earlier boiling water reactor generations. Advanced boiling water reactors (ABWR) move the recirculation pumps inside the vessel, and their units open the ABWR concept.

Fission boils water directly inside the reactor vessel. Separators and a dryer above the core remove droplets before steam leaves for the turbine, so this cycle has no steam generator.

Fuel
Uranium dioxide
Reaction
Splitting heavy nuclei
Energy transfer
Direct cycle: water boils in the vessel

The vessel envelope and main-steam arrangement follow published descriptions; internals spacing, recirculation loops, pedestal, and plant placement are illustrative.

Concept source: US NRC · Boiling water reactors. Procedural geometry drawn for teaching: source anchors are identified in the component records; other dimensions and placement are illustrative. No physics results are computed.

Spotter’s guide · BWR

Boiling water reactor

Water boils inside the reactor vessel and the steam goes straight to the turbine. One loop, no steam generators.

ABWR · ESBWR · BWRX-300

The whole station · Limerick

Limerick as one power plant.

Every unit on the site, from the atlas’s unit records: each reactor drives its own generator, which feeds the station’s switchyard and the grid. This is a schematic of how the units connect, not the station’s layout; the atlas records no buildings, cooling, switchyard arrangement or grid voltage.

Limerick-1: BWR, operating, 1,055 MWe netLimerick-1BWRG1,055 MWeLimerick-2: BWR, operating, 1,055 MWe netLimerick-2BWRG1,055 MWeSwitchyardGridLimerick-1: BWR, operating, 1,055 MWe netLimerick-1BWR · 1,055 MWeGLimerick-2: BWR, operating, 1,055 MWe netLimerick-2BWR · 1,055 MWeGGrid
  • Operating · 2
  • On this page
Operating
2 units · 2,110 MWe netPublished net capacities, from the unit table
Plant concepts here
BWR reference (2)