Plant concept · Fusion

Pulsed-power fusion.

The pulsed-power fusion reference plant concept in 3D. Open a site from the globe, or from the list beside the view, to see its real numbers next to it.

Show this family on the globe
Close view of the illustrative pulsed-power fusion plant concept: a wheel of thirty-six radial driver modules whose copper transmission lines converge on a central chamber, cut open to show a liquid wall around a small target, with its heat loop running to a heat-exchanger column, inside an open steel building frame.REFERENCE CONCEPT · NOT A SIMULATION

Reference still · interactive view loads when available

Reference concept · Concept study · Pulsed power

The pulsed-power fusion reference plant.

The family’s reference concept, not any one station. The model illustrates a pulsed-power fusion concept, with the generic layout every design in the plant library shares: the reactor island, a turbine hall, air-cooled condensers and a grid connection. It does not show a real station's buildings, number of units, cooling or equipment.

The machines on the map are single-shot experiments, one still under construction, and their drivers differ: Z discharges Marx generators through water lines, Machine 3 serves projectile fusion, in which a fast projectile strikes the target, and the Pacific Fusion Demonstration System is built from impedance-matched Marx generator modules. None has produced net electricity, so the liquid-wall chamber and steam plant are conceptual.

A ring of pulsed-power modules stores electrical energy and releases it in one short, intense pulse. Transmission lines carry the current inward to a small target at the center of the chamber, and the current’s magnetic field crushes it. In this conceptual plant, a thick liquid wall inside the chamber absorbs the energy and carries the heat to a separate steam circuit.

Target fuel
Deuterium + tritium target
Reaction
Magnetically driven implosion
Energy transfer
Liquid-wall heat-transfer loop

The 36 radial modules follow the layout of Sandia’s Z machine, drawn far more compact. The thick liquid wall and a final transmission line replaced every shot follow published Z-pinch fusion energy (Z-IFE) studies. Module size, the chamber, the loop and the steam interface are illustrative. The power-plant extension is conceptual: no pulsed-power device has produced net electricity, and no gain, output, repetition rate or availability is claimed.

Concept source: Sandia National Laboratories · How does the Z machine work?. Procedural geometry drawn for teaching: source anchors are identified in the component records; other dimensions and placement are illustrative. No physics results are computed.

Spotter’s guide · Pulsed power

Pulsed-power fusion

A huge, brief electrical pulse drives the implosion instead of lasers: tens of millions of amps in a fraction of a microsecond.

Z machine