← Reactor Atlas · HTGR family

A specific reference / three scales

Heat from a bed of pebbles.

HTR-PM · 2016 demonstration design basis. Source-backed educational concept · not as-built CAD. Follow helium from the graphite core to a separate water and steam circuit.

This arrangement is one HTGR example. Other high-temperature and gas-cooled reactor designs differ.

Fuel pebble: generated schematic of the selected pebble-bed reference. Camera scale changes to millimetres. Particle symbols are enlarged and sampled; coatings are described, not resolved.NOT A SIMULATION

Generated schematic · inspect in 3D or read below

Schematic still · all descriptions remain available below.

Ø 60 mm · fuel zone Ø 50 mm
Camera scale changes to millimetres. Particle symbols are enlarged and sampled; coatings are described, not resolved.

Follow the heat

Choose a step to move between the system, vessel and pebble scales. The complete explanation is also below.

The complete explanation

The generated schematics, scale links, component descriptions and citations are available without 3D or JavaScript. A cutaway is an inspection aid; it is not an opening in the operating plant.

  1. Start inside a pebble

    Fission heat originates in fuel kernels. Buffer carbon, inner pyrocarbon, silicon carbide and outer pyrocarbon surround each kernel. The graphite matrix conducts heat to the pebble surface; coating thicknesses are not modeled. [S3]

  2. Carry heat down the bed

    Helium enters the upper plenum, descends among the pebbles and leaves through the central hot-gas duct. Arrows show direction only, not velocity or a calculated temperature field. [S2]

  3. Exchange heat without mixing

    Helium flows downward outside the steam-generator tubes as water rises inside them. The tube wall separates the fluids. Cooled helium rises outside the shroud to the blower, then returns through the coaxial duct annulus. [S2]

  4. Join two steam supplies

    Two reactor modules have separate helium circuits and steam generators. Their secondary steam supplies join at one turbine. Manifolds and the conventional power equipment are schematic. [S1]

  5. Read the limits

    This is one documented pebble-bed arrangement. Other HTGRs may use prismatic fuel or different system layouts. AGR, Magnox and gas fast reactors are separate families. This display does not calculate reactor performance or establish safety. [S4]

Components and evidence

Reactor pressure vessel

Pressure boundary around graphite internals. The 25 m tall, 6.4 m wide display envelope, head contour and supports are inferred.

Evidence · S1
Pebble-bed core

Published active envelope: 3 m diameter × 11 m height. Enlarged sparse markers show the bed; they do not reproduce its packing or 420,000-pebble inventory.

Evidence · S1
Graphite reflector

Graphite surrounds the bed. Side-reflector coolant channels carry helium upward before it turns down through the core. Channel positions and reflector thickness are inferred.

Evidence · S2
Pebble handling

Top charging and bottom discharge cues represent online fuel handling. Sorting, recirculation, storage and detailed mechanisms are omitted.

Evidence · S4
Cool helium route

From the blower: duct outer annulus → side-reflector channels → upper plenum. Return from the SG rises outside its shroud. Arrow placement and line thickness are illustrative.

Evidence · S2
Heated helium route

Helium descends through the bed and exits through the central hot-gas duct. In the SG it descends outside the heat-exchange tubes.

Evidence · S2
Helical steam generator

Each module has its own once-through steam generator. Water rises inside the helical tubes while helium descends outside. Nineteen assembly positions are shown with one representative helix each.

Evidence · S1
Helium circulator

A blower above the steam generator drives the primary helium circuit. Rotor, housing and ducts are simplified.

Evidence · S4
Water / steam circuit

The two steam generators feed one turbine. Feedwater returns to their lower ends. The common manifold, condenser and pipe routing are schematic. Water never joins the helium circuit.

Evidence · S1
Turbine and generator

One shared turbine-generator represents the documented system arrangement. Its shape, size and placement are inferred; no output is calculated.

Evidence · S1
Condenser / feedwater return

Schematic cycle closure: exhaust condenses and water returns to the steam generators. Cooling-water infrastructure and auxiliary systems are omitted.

Evidence · S1
Fuel-free graphite shell

The 60 mm pebble has a 5 mm fuel-free graphite shell. A display cutaway exposes the inner zone; the real pebble is closed.

Evidence · S3
Fuel-bearing graphite matrix

Coated particles are distributed within a 50 mm diameter graphite zone. Graphite carries heat toward the pebble surface.

Evidence · S3
Representative coated particles

The published pebble contains approximately 12,000 TRISO particles. Visible dots are enlarged sampled symbols, not a counted inventory or a particle-layer model. Coatings are described in the guide.

Evidence · S3

Dimensions, design values and assumptions

Published values describe the selected historical design basis; they are not simulation results. Source S2 uses different steam conditions; the concept retains S1’s values. The vessel envelope, exact channel positions, tube turns, supports, pipe bends and plant placement are inferred. Controls, shutdown systems, fuel sorting, shielding and auxiliary systems are not fully represented.

Parameter evidence for the displayed concept
ParameterValueEvidence
modules2 countdocumented · S1Table 1
module Thermal Power250 MWthdocumented · S1Table 1
plant Electrical Design210 MWedocumented · S1Table 1
core Diameter3 mdocumented · S1Table 1
core Height11 mdocumented · S1Table 1
helium Pressure7 MPadocumented · S1Table 1
helium Inlet250 °Cdocumented · S1Table 1
helium Outlet750 °Cdocumented · S1Table 1
steam Pressure13.25 MPadocumented · S1Table 1
steam Temperature567 °Cdocumented · S1Table 1
pebble Diameter0.06 mdocumented · S3p. 1
fuel Zone Diameter0.05 mdocumented · S3p. 1
fuel Free Shell0.005 mdocumented · S3p. 1
pebbles Per Core420,000 countdocumented · S1Table 1
particles Per Pebble12,000 approximate countdocumented · S3p. 1
sg Assemblies19 countdocumented · S1Section 2.2
vessel Height25 minferredRounded display envelope; not an accepted vessel specification
vessel Radius3.2 minferredOuter envelope assumption
reflector Radius2.6 minferredAuthored thickness
core Bottom8 minferredDisplay elevation
module Pitch14 minferredEquipment separation for inspection
sg Offset8 minferredReactor-to-SG centre distance
sg Radius1.7 minferredDisplay envelope
sg Top16 minferredDisplay elevation; below core top
overview Pebble Radius0.14 millustrativeEnlarged markers; sparse sample, not physical pebbles
particle Marker Radius0.001 millustrativeEnlarged representative symbols; not particle dimensions

Sources for this reference

Public source citations identify the reference; they do not imply a partnership or endorsement. All geometry and schematics here are independently authored. No source figures are redistributed.

S1 · Zhang et al. (2016) · HTR-PM demonstration power plant

Primary design-team paper; selected reference basis · Section 2, Figure 2, Table 1; steam-generator subsection

Two 250 MWth modules, one 210 MWe turbine; core 3 m diameter / 11 m height; helium 7 MPa and 250/750 °C; 60 mm pebbles; 420,000 pebbles per core; 19 helical tube assemblies per steam generator.

Historical design basis, not current operation or dimensional manufacturing drawings. HTML read; PDF redirect failed. Accessed 2026-11-06.

S2 · Wang, Shi & Zheng (2017) · HTR-PM steam-generator study

Primary INET system-analysis paper; topology evidence · Section 2, Figures 1–2, Table 1

Cool helium returns through the duct annulus, rises through side-reflector channels, then descends through the bed. Hot helium leaves through the duct centre, descends outside SG tubes and returns upward outside the shroud. Feedwater rises inside tubes.

Its 13.9 MPa / 571 °C steam values differ from S1; not adopted. No transient results are reproduced. Accessed 2026-11-06.

S3 · Yang, Liu & Tang (2014) · HTR-PM fuel element

Primary fuel study; pebble structure evidence · HTR2014-31281, page 1, abstract and introduction

60 mm sphere; 50 mm fuel zone; 5 mm fuel-free graphite shell; approximately 12,000 coated particles. Coatings: buffer carbon, inner pyrocarbon, silicon carbide, outer pyrocarbon.

Particle positions in this concept are authored; no temperature/stress or failure-probability results are reproduced. Accessed 2026-11-06.

S4 · Yujie Dong / GIF (2018) · Design, safety features & progress of HTR-PM

Primary designer presentation; cross-check · Webinar abstract; linked slide deck pp. 7, 10–13

Two NSSS modules and one turbine; vertical blower; counter-flow once-through helical SG; online fuel handling and reflector control systems.

Presentation text read; web PDF screenshot unavailable. Does not establish a complete as-built envelope. Accessed 2026-11-06.