← All learning journeys

From neutron loading to cooling.

Describe the information exchanged between radiation transport, materials and heat removal.

0 of 4 checkpoints complete. Continue at step 1 ↓

  1. STEP 1 / 4

    Define the particle source

    Open research question W01. List what describes your source: particle type, energy spectrum, direction and normalization.

    Foundations. A transport calculation follows each particle through the material. It records what happens, for example when a particle is absorbed.

    Read the other explanation levels

    Applied. For a pure absorber with a normally incident beam, dI/dx = −ΣI gives transmission T = exp(−ΣL). The OpenMC lab tests this restricted case.

    Research. The lab omits scattering, energy redistribution and real isotope data. Batch uncertainty measures sampling precision, not nuclear-data or model-form error.

    Explore this research question ↗

    Checkpoint

    Is one simulated history equivalent to one second of plant operation?

    Sign in to write your answer and keep it.

    Show explanation

    No. Tallies are typically normalized per source history. Physical rates require an explicitly defined source-rate conversion.

  2. STEP 2 / 4

    Translate deposition into a heat source

    Open research question W02. Draw where a radiation model passes a deposited-energy field into a heat model.

    Foundations. Energy that stops in the wall heats the wall. A coolant carries some of that heat away over time.

    Read the other explanation levels

    Applied. A thermal balance can be written ρcp ∂T/∂t = ∇·(k∇T) + q‴. Every term must use consistent units and compatible spatial resolution.

    Research. Conserve integrated deposited energy when mapping tallies to a thermal mesh. Test temporal averaging against the wall's diffusion timescale, approximately L²/α.

    Explore this research question ↗

    Checkpoint

    Can neutron transmission alone determine a wall temperature?

    Sign in to write your answer and keep it.

    Show explanation

    No. Deposition, temporal loading, geometry, thermal properties and heat-removal conditions are also needed.

  3. STEP 3 / 4

    Add isotope transport carefully

    Open research question W03. Mark which temperature or material inputs come from another model. Then open the FESTIM lab.

    Foundations. Hydrogen atoms, including tritium, can move inside a solid and pass through it. This is not the same process as heat flow.

    Read the other explanation levels

    Applied. Fick's law J = −D∇c links concentration gradients to particle flux. A steady constant-D slab is a useful first verification case.

    Research. Real retention can depend on trap populations, irradiation damage and boundary kinetics. Parameter identifiability and uncertainty matter before coupling to a fuel-inventory model.

    Explore this research question ↗

    Checkpoint

    Does a diffusion-only calculation include trapping automatically?

    Sign in to write your answer and keep it.

    Show explanation

    No. Trapping, surface reactions, thermal dependence and interfaces need their own equations, parameters and validation.

  4. STEP 4 / 4

    Write the coupling contract

    Write down the quantity, units, mesh, time window and uncertainty that each model supplies. Keep it with your inputs.

    Foundations. Two models can work together only when the output of one means the same thing as the input of the other.

    Read the other explanation levels

    Applied. One-way coupling passes a result forward; two-way coupling also updates the upstream model. Choose based on whether feedback changes the answer materially.

    Research. Check conservation residuals independently of solver residuals. Propagate correlated uncertainties and record the iteration or convergence criterion for feedback.

    Explore this research question ↗

    Checkpoint

    What is the first check after transferring a source field?

    Sign in to write your answer and keep it.

    Show explanation

    Check units and integrated conservation, then interpolation error, time alignment and feedback assumptions.

Explore the two code labs →

Sources and further reading

Teaching content reviewed against public primary sources on 9 September 2026. The simplified examples have their own assumptions and verification checks.