LASER FUSION / A PHYSICS WALKTHROUGH

Follow one plant cycle.

From electrical services to the target event, heat removal and readiness for the next pulse. Choose direct or indirect laser drive and follow what enters, changes and leaves.

Learning journeys ↗
Read the full sequence ↓

Eight seconds per teaching step; this is not physical elapsed time. Motion is reduced or data saving is on: use Next and the step list for still views.

STEP 1 / 12 · PAUSED

Bring plant services online

Conceptual power-plant integration

PLANT / SCHEMATICNot to scale
Bring plant services online: physics schematicPower supplies, pumps, monitoring and control systems establish the support conditions for a target event. Conditioned electrical supplies, circulating coolant and readiness information. Arrows indicate conceptual directions; sizes and motion do not represent calculated values.ElectricityServicesReadinessSupporting services continue alongside this process
Startup and continuous support; design dependent. Presentation motion shows sequence only.
What enters?
External electrical power and available cooling capacity.
What changes?
Power supplies, pumps, monitoring and control systems establish the support conditions for a target event.
What leaves?
Conditioned electrical supplies, circulating coolant and readiness information.
Explore the physics and research question

Which support loads and thermal conditions must be sustained throughout operation?

Applied. These services overlap the later steps; they do not switch off when the explanation moves on. Stored energy and thermal inertia introduce their own response times.

Research. Distinguish electrical demand from useful driver energy. A plant energy balance must include recirculating power, start-up conditions and auxiliary loads.

Link to this step ↗
Locate this process in the whole-plant model

The existing display geometry is a conceptual map. Its scale differs from the target close-up above. Highlighted parts and moving dots show the current process, not calculated fields.

CONCEPTUAL REACTOR VIEWNOT A SIMULATION
Existing laser fusion display model. Components and dimensions are conceptual, not solver-ready.

Electrical — existing conceptual display part.

Explore every component with the text controls. Load 3D when you’re ready.

The full text sequence

Every step is available here, including with motion disabled, no graphics support, or no JavaScript. The sequence follows a pulse through overlapping systems; it is not an operating procedure.

Indirect drive: all 12 steps
  1. Bring plant services online

    Plant · Startup and continuous support; design dependent · Conceptual power-plant integration

    Enters: External electrical power and available cooling capacity.

    Changes: Power supplies, pumps, monitoring and control systems establish the support conditions for a target event.

    Leaves: Conditioned electrical supplies, circulating coolant and readiness information.

    Research question: Which support loads and thermal conditions must be sustained throughout operation?

    Applied and research explanations

    These services overlap the later steps; they do not switch off when the explanation moves on. Stored energy and thermal inertia introduce their own response times.

    Distinguish electrical demand from useful driver energy. A plant energy balance must include recirculating power, start-up conditions and auxiliary loads.

    Research workflow ↗ · Primary source ↗
  2. Prepare the chamber environment

    Chamber · Preparation and between-pulse recovery; not a target-pulse timescale · Conceptual power-plant integration

    Enters: A chamber containing residual gas and material from earlier operation.

    Changes: Pumping and conditioning establish the intended environment and protect the optical path and target delivery.

    Leaves: Removed gas and a chamber ready for the specified operating conditions.

    Research question: How does residual gas or debris affect beam propagation and the next target?

    Applied and research explanations

    Vacuum preparation is a gas-flow and surface-outgassing problem. The appropriate continuum or rarefied description depends on mean free path relative to geometry.

    Quantify gas loads, conductance and pumping boundary conditions. Chamber clearance after repeated pulses requires coupled gas, debris and optical-transmission evidence.

    Research workflow ↗ · Primary source ↗
  3. Deliver a prepared fuel target

    Target close-up · Target delivery and alignment precede the very short laser pulse · Conceptual power-plant integration

    Enters: A prepared fuel capsule inside an x-ray-producing enclosure (a hohlraum).

    Changes: The target is positioned and aligned with the driver. Repeated delivery and survival in a power-plant chamber remain engineering challenges.

    Leaves: One prepared target at the interaction position, with alignment information.

    Research question: How can a target arrive intact and meet the alignment requirements?

    Applied and research explanations

    The fuel is carried by the target. Filling the entire chamber with deuterium gas is not the fueling step in this laser-target example.

    Separate target fabrication and cryogenic conditioning from injection, tracking and shot alignment. The display contains no fabrication tolerances or target-design prescription.

    Research workflow ↗ · Primary source ↗
  4. Store and condition driver energy

    Beamline · Charging and conditioning are much slower than the target event · Established supporting physics

    Enters: Electrical energy and a low-energy seed laser pulse.

    Changes: Driver hardware stores and conditions energy, then pumps the amplifying medium into an excited state.

    Leaves: An energized amplifier system and a controlled seed pulse.

    Research question: How do driver efficiency and waste heat affect plant demand?

    Applied and research explanations

    Electrical input, stored energy and optical output are different quantities. Losses appear in power electronics, pumping, optics and cooling.

    Define the system boundary when reporting efficiency. Wall-plug efficiency is distinct from gain at the fusion target; a target gain alone cannot establish net electricity.

    Research workflow ↗ · Primary source ↗
  5. Amplify, transport and focus the pulse

    Beamline · Optical transit and pulse duration are separate timescales · Established supporting physics

    Enters: Seed light and energy stored in the laser medium.

    Changes: Stimulated emission amplifies the pulse. Transport and final optics guide and focus the light toward the target assembly.

    Leaves: A shaped laser pulse delivered to the interaction region, plus optical and thermal losses.

    Research question: How do beam nonuniformity, propagation and optical damage limit repeat operation?

    Applied and research explanations

    Temporal shape, spatial profile and synchronization influence energy coupling. This schematic shows direction and sequence, not a calculated optical field.

    Laser-plasma interactions can redirect or reduce useful drive energy. Model selection must match the required wave, kinetic or radiation-hydrodynamic description.

    Research workflow ↗ · Primary source ↗
  6. Convert laser light into x-ray drive

    Target close-up · Target physics: nanosecond-scale drive, shown in slow explanatory time · Demonstrated target physics

    Enters: Laser light at the target assembly.

    Changes: The laser heats the enclosure; radiation from that enclosure supplies x-ray energy to the capsule surface.

    Leaves: X-ray illumination of the capsule, with conversion and escape losses.

    Research question: How do radiation conversion and illumination symmetry affect the capsule drive?

    Applied and research explanations

    The hohlraum and the capsule have distinct roles: one converts and distributes radiation, while the other carries the fuel.

    Radiation transport, plasma conditions and symmetry evolve together. This two-dimensional close-up cannot represent an implosion's three-dimensional asymmetries or predict target performance.

    Research workflow ↗ · Primary source ↗
  7. Ablate outward and compress inward

    Target close-up · Rapid implosion; distinct from the shorter fusion burn interval · Demonstrated target physics

    Enters: Energy at the outer capsule surface.

    Changes: Heated surface material expands outward. The reaction drives the remaining shell inward and compresses the fuel; shocks and pressure do work on it.

    Leaves: Outward ablated material and a rapidly evolving compressed fuel assembly.

    Research question: How do asymmetry and unstable interfaces degrade compression?

    Applied and research explanations

    Ablation is outward while compression is inward. The arrows show those opposite directions; the radius shown is a teaching cue, not a computed trajectory.

    Hydrodynamic instability, mix, equation-of-state uncertainty and shock timing can change compression. A symmetric picture alone cannot establish an ignition condition.

    Research workflow ↗ · Primary source ↗
  8. Release fusion energy in the target

    Target close-up · Very short burn within an evolving implosion; the animation is not a physical clock · Demonstrated target physics

    Enters: Compressed and heated deuterium-tritium fuel.

    Changes: Fusion reactions produce helium nuclei (alpha particles) and neutrons. Charged products can deposit energy locally; neutrons transport energy outward.

    Leaves: Reaction products and radiation; only part of the fuel participates in the burn.

    Research question: How do alpha heating, losses and confinement set burn propagation?

    Applied and research explanations

    D + T → helium-4 + neutron + energy. Local alpha heating and outward neutron transport play different roles. Ignition in an experiment does not itself demonstrate net electricity.

    The reaction rate depends on the evolving density and velocity distributions. Burn fraction, mix, radiation loss and disassembly must be resolved; no yield is calculated here.

    Research workflow ↗ · Primary source ↗
  9. Receive radiation, particles and debris

    Chamber · Prompt deposition followed by thermal diffusion and cumulative exposure · Conceptual power-plant integration

    Enters: Neutrons, photons, charged particles and target debris reaching the chamber environment.

    Changes: Different species travel, scatter, stop and deposit energy at different depths and times; materials experience transient and cumulative loading.

    Leaves: Deposited energy, altered material state and transmitted or scattered radiation.

    Research question: Where is energy deposited, and what loading should a material-response model receive?

    Applied and research explanations

    Surface loading and volumetric nuclear heating need different descriptions. The OpenMC absorber lab checks a small piece of transport physics, not this full source and wall response.

    Specify source spectra and normalization, transport data, tally definitions and mapping conservation. Couple pulse-resolved loads to thermal, mechanical and damage models with explicit assumptions.

    Research workflow ↗ · Primary source ↗ · Teaching lab →
  10. Move heat through coolant and heat exchangers

    Energy systems · Thermal and fluid response is much slower than target fusion · Conceptual power-plant integration

    Enters: Thermal energy in chamber-facing structures and a circulating coolant.

    Changes: Conduction and convection transfer heat into coolant; a heat exchanger transfers it to another working fluid in the conceptual power system.

    Leaves: A hotter downstream working fluid and a return coolant stream.

    Research question: Can heat be removed while keeping material temperatures and flow conditions acceptable?

    Applied and research explanations

    A basic heat-transfer balance is Q̇ = ṁ cp ΔT when properties and phase are suitably approximated. Pulse averaging requires a thermal-response justification.

    Resolve interfaces, pressure losses, property variation and transient thermal stress. Neutronic deposition must be converted consistently into the thermal model's source terms.

    Research workflow ↗ · Primary source ↗
  11. Convert heat to potential electricity

    Energy systems · Plant-scale conversion averages or buffers discrete target events · Conceptual power-plant integration

    Enters: Thermal energy supplied to a conceptual turbine cycle.

    Changes: A working fluid drives a turbine; a generator converts shaft work to electricity. Plant systems consume part of the electrical production.

    Leaves: Electrical production, internal demand and rejected heat; grid export is conditional on the full energy balance.

    Research question: What remains after driver and auxiliary electrical demand?

    Applied and research explanations

    Pnet = Pgross − Pdriver − Paux is an accounting identity, not a prediction. Heat-to-electric conversion is incomplete, and start-up draws external power.

    Couple time-averaged source power, conversion efficiency, availability and recirculating loads with explicit boundaries. Target gain alone cannot determine any of those plant-level outcomes.

    Research workflow ↗ · Primary source ↗
  12. Reject heat and prepare for the next pulse

    Plant · Recovery, fuel processing and component lifetime span different timescales · Conceptual power-plant integration

    Enters: Waste heat, residual chamber material and fuel-cycle inventories.

    Changes: Cooling rejects heat; chamber clearing and inspection support readiness. Fuel recovery, processing and possible breeding proceed as longer-running systems.

    Leaves: Heat to the environment, managed material streams and a readiness assessment for another target event.

    Research question: How do material lifetime, fuel inventory and recovery time limit sustained operation?

    Applied and research explanations

    Tritium breeding and recovery are not an instantaneous refill for the next pulse. The fuel cycle requires inventory, transport, processing and time-delay accounting.

    Quantify permeation and retention with material and boundary-condition evidence. Combine maintenance, component replacement and fuel-cycle delays before claiming a repeat rate or availability. The linked fuel-cycle reference concerns magnetic confinement; only its general processing functions are carried over here.

    Research workflow ↗ · Primary source ↗ · Teaching lab →
Direct drive: all 12 steps
  1. Bring plant services online

    Plant · Startup and continuous support; design dependent · Conceptual power-plant integration

    Enters: External electrical power and available cooling capacity.

    Changes: Power supplies, pumps, monitoring and control systems establish the support conditions for a target event.

    Leaves: Conditioned electrical supplies, circulating coolant and readiness information.

    Research question: Which support loads and thermal conditions must be sustained throughout operation?

    Applied and research explanations

    These services overlap the later steps; they do not switch off when the explanation moves on. Stored energy and thermal inertia introduce their own response times.

    Distinguish electrical demand from useful driver energy. A plant energy balance must include recirculating power, start-up conditions and auxiliary loads.

    Research workflow ↗ · Primary source ↗
  2. Prepare the chamber environment

    Chamber · Preparation and between-pulse recovery; not a target-pulse timescale · Conceptual power-plant integration

    Enters: A chamber containing residual gas and material from earlier operation.

    Changes: Pumping and conditioning establish the intended environment and protect the optical path and target delivery.

    Leaves: Removed gas and a chamber ready for the specified operating conditions.

    Research question: How does residual gas or debris affect beam propagation and the next target?

    Applied and research explanations

    Vacuum preparation is a gas-flow and surface-outgassing problem. The appropriate continuum or rarefied description depends on mean free path relative to geometry.

    Quantify gas loads, conductance and pumping boundary conditions. Chamber clearance after repeated pulses requires coupled gas, debris and optical-transmission evidence.

    Research workflow ↗ · Primary source ↗
  3. Deliver a prepared fuel target

    Target close-up · Target delivery and alignment precede the very short laser pulse · Conceptual power-plant integration

    Enters: A prepared fuel capsule for direct laser illumination.

    Changes: The target is positioned and aligned with the driver. Repeated delivery and survival in a power-plant chamber remain engineering challenges.

    Leaves: One prepared target at the interaction position, with alignment information.

    Research question: How can a target arrive intact and meet the alignment requirements?

    Applied and research explanations

    The fuel is carried by the target. Filling the entire chamber with deuterium gas is not the fueling step in this laser-target example.

    Separate target fabrication and cryogenic conditioning from injection, tracking and shot alignment. The display contains no fabrication tolerances or target-design prescription.

    Research workflow ↗ · Primary source ↗
  4. Store and condition driver energy

    Beamline · Charging and conditioning are much slower than the target event · Established supporting physics

    Enters: Electrical energy and a low-energy seed laser pulse.

    Changes: Driver hardware stores and conditions energy, then pumps the amplifying medium into an excited state.

    Leaves: An energized amplifier system and a controlled seed pulse.

    Research question: How do driver efficiency and waste heat affect plant demand?

    Applied and research explanations

    Electrical input, stored energy and optical output are different quantities. Losses appear in power electronics, pumping, optics and cooling.

    Define the system boundary when reporting efficiency. Wall-plug efficiency is distinct from gain at the fusion target; a target gain alone cannot establish net electricity.

    Research workflow ↗ · Primary source ↗
  5. Amplify, transport and focus the pulse

    Beamline · Optical transit and pulse duration are separate timescales · Established supporting physics

    Enters: Seed light and energy stored in the laser medium.

    Changes: Stimulated emission amplifies the pulse. Transport and final optics guide and focus the light toward the target assembly.

    Leaves: A shaped laser pulse delivered to the interaction region, plus optical and thermal losses.

    Research question: How do beam nonuniformity, propagation and optical damage limit repeat operation?

    Applied and research explanations

    Temporal shape, spatial profile and synchronization influence energy coupling. This schematic shows direction and sequence, not a calculated optical field.

    Laser-plasma interactions can redirect or reduce useful drive energy. Model selection must match the required wave, kinetic or radiation-hydrodynamic description.

    Research workflow ↗ · Primary source ↗
  6. Illuminate the capsule directly

    Target close-up · Target physics: nanosecond-scale drive, shown in slow explanatory time · Demonstrated target physics

    Enters: Laser light at the target assembly.

    Changes: Laser energy couples to the capsule's outer plasma and heats the ablator without an intervening x-ray enclosure.

    Leaves: Energy deposited near the capsule surface, with reflected and scattered light.

    Research question: How do illumination uniformity and laser-plasma interactions affect the capsule drive?

    Applied and research explanations

    Direct drive removes the enclosure conversion step. It still requires controlled coupling and sufficiently uniform drive around the capsule.

    Radiation transport, plasma conditions and symmetry evolve together. This two-dimensional close-up cannot represent an implosion's three-dimensional asymmetries or predict target performance.

    Research workflow ↗ · Primary source ↗
  7. Ablate outward and compress inward

    Target close-up · Rapid implosion; distinct from the shorter fusion burn interval · Demonstrated target physics

    Enters: Energy at the outer capsule surface.

    Changes: Heated surface material expands outward. The reaction drives the remaining shell inward and compresses the fuel; shocks and pressure do work on it.

    Leaves: Outward ablated material and a rapidly evolving compressed fuel assembly.

    Research question: How do asymmetry and unstable interfaces degrade compression?

    Applied and research explanations

    Ablation is outward while compression is inward. The arrows show those opposite directions; the radius shown is a teaching cue, not a computed trajectory.

    Hydrodynamic instability, mix, equation-of-state uncertainty and shock timing can change compression. A symmetric picture alone cannot establish an ignition condition.

    Research workflow ↗ · Primary source ↗
  8. Release fusion energy in the target

    Target close-up · Very short burn within an evolving implosion; the animation is not a physical clock · Demonstrated target physics

    Enters: Compressed and heated deuterium-tritium fuel.

    Changes: Fusion reactions produce helium nuclei (alpha particles) and neutrons. Charged products can deposit energy locally; neutrons transport energy outward.

    Leaves: Reaction products and radiation; only part of the fuel participates in the burn.

    Research question: How do alpha heating, losses and confinement set burn propagation?

    Applied and research explanations

    D + T → helium-4 + neutron + energy. Local alpha heating and outward neutron transport play different roles. Ignition in an experiment does not itself demonstrate net electricity.

    The reaction rate depends on the evolving density and velocity distributions. Burn fraction, mix, radiation loss and disassembly must be resolved; no yield is calculated here.

    Research workflow ↗ · Primary source ↗
  9. Receive radiation, particles and debris

    Chamber · Prompt deposition followed by thermal diffusion and cumulative exposure · Conceptual power-plant integration

    Enters: Neutrons, photons, charged particles and target debris reaching the chamber environment.

    Changes: Different species travel, scatter, stop and deposit energy at different depths and times; materials experience transient and cumulative loading.

    Leaves: Deposited energy, altered material state and transmitted or scattered radiation.

    Research question: Where is energy deposited, and what loading should a material-response model receive?

    Applied and research explanations

    Surface loading and volumetric nuclear heating need different descriptions. The OpenMC absorber lab checks a small piece of transport physics, not this full source and wall response.

    Specify source spectra and normalization, transport data, tally definitions and mapping conservation. Couple pulse-resolved loads to thermal, mechanical and damage models with explicit assumptions.

    Research workflow ↗ · Primary source ↗ · Teaching lab →
  10. Move heat through coolant and heat exchangers

    Energy systems · Thermal and fluid response is much slower than target fusion · Conceptual power-plant integration

    Enters: Thermal energy in chamber-facing structures and a circulating coolant.

    Changes: Conduction and convection transfer heat into coolant; a heat exchanger transfers it to another working fluid in the conceptual power system.

    Leaves: A hotter downstream working fluid and a return coolant stream.

    Research question: Can heat be removed while keeping material temperatures and flow conditions acceptable?

    Applied and research explanations

    A basic heat-transfer balance is Q̇ = ṁ cp ΔT when properties and phase are suitably approximated. Pulse averaging requires a thermal-response justification.

    Resolve interfaces, pressure losses, property variation and transient thermal stress. Neutronic deposition must be converted consistently into the thermal model's source terms.

    Research workflow ↗ · Primary source ↗
  11. Convert heat to potential electricity

    Energy systems · Plant-scale conversion averages or buffers discrete target events · Conceptual power-plant integration

    Enters: Thermal energy supplied to a conceptual turbine cycle.

    Changes: A working fluid drives a turbine; a generator converts shaft work to electricity. Plant systems consume part of the electrical production.

    Leaves: Electrical production, internal demand and rejected heat; grid export is conditional on the full energy balance.

    Research question: What remains after driver and auxiliary electrical demand?

    Applied and research explanations

    Pnet = Pgross − Pdriver − Paux is an accounting identity, not a prediction. Heat-to-electric conversion is incomplete, and start-up draws external power.

    Couple time-averaged source power, conversion efficiency, availability and recirculating loads with explicit boundaries. Target gain alone cannot determine any of those plant-level outcomes.

    Research workflow ↗ · Primary source ↗
  12. Reject heat and prepare for the next pulse

    Plant · Recovery, fuel processing and component lifetime span different timescales · Conceptual power-plant integration

    Enters: Waste heat, residual chamber material and fuel-cycle inventories.

    Changes: Cooling rejects heat; chamber clearing and inspection support readiness. Fuel recovery, processing and possible breeding proceed as longer-running systems.

    Leaves: Heat to the environment, managed material streams and a readiness assessment for another target event.

    Research question: How do material lifetime, fuel inventory and recovery time limit sustained operation?

    Applied and research explanations

    Tritium breeding and recovery are not an instantaneous refill for the next pulse. The fuel cycle requires inventory, transport, processing and time-delay accounting.

    Quantify permeation and retention with material and boundary-condition evidence. Combine maintenance, component replacement and fuel-cycle delays before claiming a repeat rate or availability. The linked fuel-cycle reference concerns magnetic confinement; only its general processing functions are carried over here.

    Research workflow ↗ · Primary source ↗ · Teaching lab →

Original teaching sequence reviewed against public primary sources on 9 September 2026. Geometry, timing and arrows are illustrative. Supporting-system integration is a concept, not a claim about an existing experiment or operating power plant.