Find your way around a fusion plant.
Connect one reactor component to a precise research question.
0 of 4 checkpoints complete. Continue at step 1 ↓
STEP 1 / 4
Select a reactor family
Open the research workspace. Select Tokamak, then select Laser fusion. Compare the two component lists. Keep Laser fusion for this journey.
Foundations. Fusion joins two light atomic nuclei into one. The fuel must be hot and dense for long enough. Each reactor family solves that problem in a different way.
Explore this research question ↗Read the other explanation levels
Applied. Energy confinement, particle transport and heating mechanisms differ by family. A useful model must represent the mechanism relevant to the chosen operating regime.
Research. Specify the spatial, temporal and distribution-function assumptions before selecting a solver. An equilibrium description, kinetic calculation and target implosion model answer different questions.
Checkpoint
Does a laser-fusion target behave like a continuously confined magnetic plasma?
Show explanation
No. This journey follows individual target events and the systems between them. Magnetic confinement has different operating and transport questions.
STEP 2 / 4
Locate the first wall
Select First wall. Read its description. The picture is a map, not a model. Write down the inputs a model would need.
Foundations. The first wall is the surface that faces the inside of the chamber. After each target event, radiation and particles hit it.
Explore this research question ↗Read the other explanation levels
Applied. Separate surface energy loading from heating deposited through a material volume. A surface heat flux and a volumetric source have different units and boundary-condition roles.
Research. Resolve the relevant mean free paths, penetration depths and thermal gradients. State where homogenization or a reduced geometric description changes the quantity of interest.
Checkpoint
Can the displayed geometry be used immediately as a solver mesh?
Show explanation
No. It is conceptual display geometry. A solver needs defined dimensions, materials, boundary conditions and an appropriate mesh.
STEP 3 / 4
Select a phase and a research question
Under Operating phase, select Chamber pulse to cooldown. Under Research question, select W11. Write down one quantity you want to estimate before you look at software.
Foundations. A plant has many processes that affect each other. Pick one change you want to understand. Start there.
Explore this research question ↗Read the other explanation levels
Applied. A loading history is an input to a material-response model. It is not automatically calculated by the heat solver.
Research. Define the quantity of interest, admissible error and data lineage. Distinguish model-form uncertainty from uncertain inputs and discretization error.
Checkpoint
Is ‘simulate the plant’ a sufficiently precise starting question?
Show explanation
Choose a quantity, region and timescale first: for example, a wall response after a prescribed deposited-energy pulse.
STEP 4 / 4
Follow the evidence
Open one candidate tool. Open its primary sources. Return to the research question. Then start the chamber journey.
Foundations. A source link shows what a tool is built to do and how to get it. The rating does not show how accurate the tool is.
Explore this research question ↗Read the other explanation levels
Applied. Check the solver version, equation set, supported inputs, hardware and access requirements together.
Research. Trace claimed applicability to benchmarks in the relevant regime. Record missing evidence and avoid transferring validation across unrelated observables.
Checkpoint
Does a high discovery rating prove accuracy for your problem?
Show explanation
No. The ratings support discovery. A validated model for your regime requires separate numerical and experimental evidence.